Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

PROGRAM KEYPAD -you can follow this to set your keypad to site 100 (or choose other number between 1-255).

  1. Cycle power to the reader.

  2. Present the Wiegand Keypad Data Mode control card to the reader (beeps four times).

  3. Press 100#

  4. Press *

  5. This will change the reader output to 26 bit Wiegand output SITE CODE 100

  • No labels